Hello ! 💖

Hi Crafty Friends !

Hope you are well 💖Today's project's a fab shaker card made with the new stunning Cut and Emboss -Embossing folders by Crafter's Companion.  They are really easy to use and  you can  create beautiful and quickly cards.
Hope you like it !

To create this beautiful card you will need:

Centura Pearl Snow White
Petite Florals Cut and Emboss Folder
Sheena Stamping Cardstock
Core'dinations Cardstock
Distress Ink Broken China
Simplistic Words die - Flutterby Collection
Half Pearl
3d Collal Glue
Tacky Glue
Blue ribbon 50 cm - 5 mm width
Gems

For the shaker window: 

1-Cut a piece of clear acetate larger than the aperture. Center the acetate over the back of the cutout and adhere the acetate to the cardstock.

2-Add a double layer of foam tape around the entire border of the aperture, making sure that there aren’t any gaps where pieces of filler could work their way through after the card is assembled.

3-Remove the backing from the foam tape. Then, put the sequins in the center of a piece of Centura Pearl cardstock slightly larger and  line up the topper over the sequins and press down firmly.

4- Add another layer of blue cardstock and finally affix to the blank.

Thanks for stopping by  💖 Happy Crafting !

Fancy Butterflies - Cut and Emboss

Hello Crafty Friends
Hope you are well and happy.💖 Today project is a beautiful ten fold card made with the new Cut and Emboss - Embossing folders by Crafter's Companion - They are lush ! I love them all 💖

To create this WOW card you will need:
-Centura pearl Snow White cardstock
-Black matt cardstock
-Centura Pearl Pastels Cardstock
-Glitter cardstock - Flutterby Collection-
-Trio of wings die - Flutterby Collection-
-Simple Sentiments die'sire die.
-Cut and emboss kit - Nature -
-Distress oxide inks -Shaded Lilac & Broken China
- Blue gems 3mm
-Collal Tacky Glue
-Collal Gel Glue
- Light lilac ribbon 5mm width -50 cm
-Half pearl flat back resin 13mm

Add few layers of the distress oxide ink until happy with the result 💖

Open the loops of the bow wide before adding the 3D glue. 

This will help to maintain the bow's shape.

Step by Step

1. Emboss a piece of Black cardstock with the emboss and cut embossing folder.
2.- Rub on the distress ink Shaded Lilac from the top part of the piece until 2 cms after the centre. Repeat the process with the Distress ink Broken China but starting from the bottom. Remember difuminate well in the union of the colours.
3. Matt onto a piece of Centura pearl pastel Lilac and again onto a black cardstock.
4. Affix the piece onto a ten fold blank slightly bigger.
5. Die cut the world "celebrate" from Centura pearl Snow White. Glue it onto the aperture over the Lilac Centura Pearl.
6. Die cut the butterfly from the Purple Glitter Cardstock and affix to the big embossed butterfly only in the center. Lift the wings to add movement. Add the Blue gems to the other butterflies.
7. Create the bow with 4 loops of ribbon of 8 cm approx. Make a knot in the center and open the loops wide. Affix to the bow to the card's  top left corner with the 3D gel glue. Add the half pearl in the center to finish.

Hope you like it guys 😉

Thanks for stopping by  💖 Happy Crafting !

Build your own Dreams - 3D Embossing

Hello Crafty Friends

Hope you are Ok. 💖Today's project is a simple and delicate card made with the stunning 3D embossing folders from Crafter's Companion. Hope you like it !

You will need:
3D Embossing Folder Ornate Lace
Centura Pearl Snow White
Catitudes Paper Pad
Pink ribbon 2,5 cm width
Crafter’s Companion A6 Rubber Stamps 3D Cabochon Flatback
3d Glue Collal
Tacky Glue
Distress Ink Pink Raspberry
Sheena White Stamping Card
Stazone Ink Jet Black

To create the distress embossed background just tap your distress ink pad over the deboss part of the embossing folder before adding the paper and embossing with the die cutting machine. Easy peasy !

Thanks for stopping by  💖Happy Crafting!

With Love - Easel Card

Hello Crafty Friends !

Hope you are well and happy 💖 Today's project is a easel card created with the new  of dies  Die'sire Create a Card Easel Collection- by Crafter's Companion. The dies are awesome and every item comes with all you need to create the perfect easel card 💖 What I can say ? I love them all !

For create this card you will need:


Die'sire Create a Card Easel Dies - Heart Easel

Pink Foam

English Country Garden Cardstock

Distress Ink Picked Raspberry

White half Pearls

Simplistic sentiments die -Flutterby Collection-

Black Cardstock

Clear gems

Clear Glitter

Collal Glue

Spray and Stick glue

Thanks for Stopping by  💖 Happy Crafting!

Butterfly Easel 🦋

Hello Crafty Friends

Hope you are fine  💖Today's project is a beautiful easel card made with the  new  Die'sire Create a Card Easel Collection- by Crafter's Companion.  The easel cards are now dead easy to create and with a beautiful system that allows you to create an intricate or a simple card in a flash!

For create this card you will need:
Die'sire Create a Card Easel Dies - Heart Buterfly
Lace Doily -Shabby Chic- Collection
Create a Card Accordion Circle Die
Die'sire Circle  essentials die
Die'sire Essentials - Flowers For All Occasions 3 DieFoam Pads

Craft Cardstock
Centura Pearl Snow White

English Country Garden Cardstock

Distress Ink Picked Raspberry

White half Pearls
Golden half pearls

Stazone Jet Black

Collal Glue

Spray and Stick glue

Thanks for stopping by 💖  Happy Crafting !

Floral Door Hanger

Hello Crafty Friends!

Hope you are ok! Today's project is a beautiful door hanger made out of mdf and the stunning flowers from the Quilling Collection by Crafter's Companion. I created this lovely home decor in a shabby chic style with lots of glitter !
Hope you like it💖

You will need:
Shabby Chic Centura pearl A3
Door hanger MDF
Collal Glue
Quilling Dies Assorted leaves,  Gardenia Duo and Shabby Rose duo
Simplistic sentiments die -Flutterby Collection-
Black cardstock
Quilling strips by Crafter's Companion
Clear Glitter
Spray and Stay

Thanks for stopping by 💖 Happy crafting !

Hanging Hearts 💖 -Quilling

Hello Crafty Friends

Hope you are fine. 💖Today's project is a hanging hearts decoration made with the new stunning collection "Quilling Dies" by Crafter's Companion. The dies make so easy to create beautiful dimensional flowers and foliage that can be used in so many ways. Hope you like it !

You will need:

Sara signature Country Garden Paper pad
Quilling Die
Quilling tool

Assorted Leaves Largest Die
Peony Duo Largest Die
Quilling paper strips

Shabby Rose Duo Largest DieWooden Hearts
Collal Glue
Clear Glitter
Green Foam

  Thanks for stopping by 💖Happy Crafting !

Butterfly birthday

Hello Crafty Friends

Hope you are happy and fine. Today project is a side fold card I created by using the beautiful Flutterby Collection. I keep the card simple because the diecuts are delicate and beautiful.

You will Need:

Blank  12 x 18 cm

Crafter's Companion Flutterby Arrangement of Butterflies  Die

Crafter's Companion Flutterby  Adornments Die

Crafter's Companion Flutterby  Simplistic Sentiments Die

Sheena  White Stamping Card

Crafter's Companion Luxury Cardstock Pack - Gold

Collal Tacky Glue

Golden Gems

Craft Essentials

Step by Step

1.  Cut a piece of 11x17 cm out of gold metallic cardstock.  Attach to the blank.

2. Cut a piece of 10x16 cm out of Sheena Stamping card. Emboss half of the piece  diagonally  with the Scattered in the Winds embossing folder.  Die cut the piece diagonally with the Arrangement of Butterflies. Run the blade of your scissors to the borders to give it a distress look. Layer the piece to the blank as shown.

3. Die cut the sentiment with the Simplistic Sentiments out of glitter golden cardstock. Secure the sentiment in the left top corner.

4. Die cut the butterfly  with the Simplistic Sentiments die out of the  golden cardstock. Attach to butterfly  to the right bottom  corner.

5. Die cut the flourish corner  with the Adornments die out of gold glitter cardstock.  Stick the flourish  to the right top corner. Finally, add the gems  to the centre of the flowers.

Thanks for stopping by  💖Happy Crafting !

Flutterby Collection

Hello Crafty Friends

Hope you are fine 💖 a while ago I did  a few tutorials for a magazine with the new awesome Collection Flutterby from Crafter's Companion and I loved it 💖 The collection is one of the most amazing bunch of crafty goodies from CC !

Here is the first of the cards I made. Hope you like it 😉

You will need:

Blank  21x15 cm

Crafter's Companion Flutterby  embossing folder Scattered in the Wind

Crafter's Companion Flutterby metallic cardstock

Crafter's Companion Flutterby Stamp and Die Set Frame Wings

Crafter's Companion Flutterby die Simplistic Sentiments

Sheena  White Stamping Card

Distress Inks  Shaded Lilac and Peacock Feathers

Spectrum Noir Watercolour pens

Spectrum Noir Clear Sparkle pen

Stazone Ink Jet Black

Dabber

Collal Tacky Glue

Purple gems

Pink Ribbon

Craft Essentials

Step by Step

1- Stamp  the butterfly in a piece of white Sheena Stamping Card with Stazone Ink. Colour the butterfly with the Spectrum Noir Watercolour pens (Magenta, Rose Pink,  wildflower)and when it dries apply the Sparkle pen all over the image and cut around it.

2. Cut a piece of Sheena stamping card of 19 x 13 cm and apply the distress ink slightly starting from the centre. Apply  the distress ink Lilac to the borders  spreading  the ink towards the centre and let it dry. Emboss this piece with the Scattered in the Wind embossing folder.  Run the blade of the scissor across the borders to give it a distressed look.  Glue the ribbon in the middle of the card. Attach to the blank. Affix the butterfly in the right bottom corner and add the gems to the corners.

3. Finally, die cut the sentiment from the  metallic  purple cardstock and stick it to the left top corner as shown.

Thanks so much for stopping by  💖 Happy Crafting !

Holiday Memories - Tutorial

Christmas is the most special period of the year and is time to impress the people who are important to you with the most unique Christmas cards. The Kinetic cards are really easy to create and the result is stunning. Let's get started!

You will need:

-Black Mat Cardstock
-Circle Kinetic Die Basic
-Neenah Card
-Centura Perl Snow White
-Traditional Christmas Cardstock
-Jingle Bells Die'sire Stamp Set
-Golden Luxury Cardstock
-Lace Doily Die
-At Christmas and Snowflakes of Joy dies from "Contemporary Christmas Collection"
- Die'sire Circle die
-Collal Tacky Glue
-Foam Pads
-Distress Ink Aged Mahogany
-Ribbon
-Flat back Cabochon
-Stazone Jet Black
-Glossy Accents

Step 1


Create a card base with the Kinetic Circle Die in Black Mat Cardstock.

Step 2

Die cut the layering pieces with the outside cutting die of the Kinetic set.
(Remember to cut two circular ones). Apply the distress ink working in circular motions to the edges of the paper using a sponge or a blending tool.


Step 3


Use the ribbon to create a bow. Wrap the ribbon around the bigger piece of layer as shown.


Step 4

Die cut a small doily out of Golden matte cardstock.


Step 5

Use the Stazone Ink to stamp the sentiment. Cut it out with the circular die and affix to the golden doily using foam pads.


Step 6

Add the pieces to the base card using the tacky glue. Remember to attach the back circle!


Step 7

Die cut the deer ("At Christmas" set) out of Black Mat Cardstock. Cover the die cut with a thin layer of Glossy Accents and let it dry before attach it to the card. Glue the Bow.


Step 8
Die cut 2 Snow Flakes one in Golden and one in White overlap them and attach them together by the centre. Finally, add a Golden half pearl to the centre and affix the piece in the centre of the back circle.






Finally, a huge thank you to all of my loyal crafty friends.   I sincerely appreciate your support. Wishing you and your families all the best in 2018. 🎄🎅

Celebrate !

Hello Crafty Friends !


Hope you are Ok.This Christmas card is quick and stylish. I created this card to go with  my present for the Secret Santa. The present was a handmade bracelet in Silver 925, sweet water pearls and the traditional Czech Preciosa beads.

 I am so glad she like it ! 


You'll need:

-Neenah Card
-Blank stepper card
-Centura Perl Snow White
-Traditional Christmas Cardstock
-Jingle Bells Die'sire Stamp Set
-Golden Luxury Cardstock
-Parisian Mirror Die
- Snowflakes of Joy dies from "Contemporary Christmas Collection"
- Die'sire oval die basic
-Collal Tacky Glue
-Foam Pads
-Distress Ink Aged Mahogany
-Golden Half Pearls
-Stazone Jet Black

Happy Holidays 😍

Hello Crafty Friends !

Hope you are OK . Today's card is easy christmas card made with the stunning Centura Pearl Gold cardstock and a lot of die cutting! Hope you like it

You will need:

-Neenah Card
-Sizzix  Framelits Stephanie Barnard Drop-Ins Card Die Set
-Centura Perl Snow White
-Traditional Christmas Cardstock by Crafter's Companion
-Jingle Bells Die'sire Stamp Set by Crafter's Companion
-Golden Luxury Cardstock by Crafter's Companion
-Parisian Mirror Die by Crafter's Companion
- Snowflakes of Joy dies from "Contemporary Christmas Collection"
    by Crafter's Companion
- Die'sire oval die basic
-Collal Tacky Glue
-Foam Pads
-Distress Ink Aged Mahogany
-Red sequins
-Golden Half Pearl
-Stazone Jet Black

Thanks for stopping by 💖 Happy Crafting !