Sparkle - Tutorial 🎄 Happy New Year !

Happy New Year! 🎄 Crafty Friends.
 As we celebrate this season of joy and good will, I wish all my blogger friends to have yourself an awesome New Year 2019. 🎅May this year bring new happiness, new goals, new achievements and a lot of new inspirations on your life.

Here's the last project of 2018. A stunning dimensional card full of Christmas crafty goodies. Hope you like it!

You will need:

Blank  17 x 15 cm x2

Gemini Create-a-Card Christmas Dimensionals - Tree Concept Die

Gemini Create-a-Card Christmas Dimensionals - Tree Accessories Pack Dies

Gemini Dimensionals Clear Stamp - Tree Accessories

Gemini Dimensionals Clear Stamp - Festive Phrases

Gemini Dimensionals Elements Metal Die - Sparkling Snowflakes 1

Crafter’s Companion Dimensionals 12 x 12 Printed Paper Pad - Decorative Christmas

Crafter’s Companion Dimensionals 12 x 12 Matt Cardstock - Decorative Christmas

Gemini Dimensionals 5 x 7 Embossing Folder - Holly Vine Swirls

Centura Perl Snow White cardstock A3

Distress Ink Mowed Lawn

Neenah Cardstock

Red Ribbon

Multicolour Gems

Stazone Jet Black inkpad

Distress Inks  

Spray and Stay permanent glue

Collal Tacky Glue

Craft Essentials

Step by Step

1-  Create 2  blanks of 17x15 cm for the base card with the Centura Pearl A3 Cardstock. Score and fold one by the middle. Keep the other one straight and draw a line with a pencil in the half. Do not score!

2-  Position the Tree concept die in the straight card. Make sure the notches in the die are aligned with the pencil line. Secure the die in position with a low tack adhesive, cut it with the die cut machine and manipulate the pop-up. Score across the card but not over any of the concept parts, gently fold out the Tree. 

3.-Cut a piece of 8.5 x 15cm out of patterned paper from the Decorative Christmas cardstock. 

Position the piece in the inside top of the card and place your concept die over the base card in the same place where you have the first die cut.  Secure the die with a low tack adhesive, (only this piece of paper).  Remove the base card from underneath and run it through the die cutting machine. Snip and discard away the partial die cut.

5.- Line the base card with the pop out over the plain base card so the back of the pop out can be seen. Use a piece of paper pad with the same design of the inside of the card to stick in the base card just underneath the white space where the pop up is.

6.- Glue the two blanks together. Make sure don't glue around or in your pop up.

7.Die cut the pop out tree by his own out of green cardstock, the little windows and the scenes to be positioned at the side of the tree. Use the frame and tree stamps with the Stazone ink over the die cuts to give it more detail. Attach the scenes behind the windows. Add foam pads and attach each side of the tree in the card.

8 Die cut the elements from the Tree Accessories pack out of coloured cardstock. Attach them to the stamped tree. Affix the tree over the pop out.

9. Die cut enough foliage to decorate the border of the card and the windows in light and dark green cardstock. Place then in the inside top on the card from side to side. Die cut the little poinsettias and place them in the foliage as shown. Add a yellow gem in the centre of the poinsettias.

10. Attach the foliage die cuts to the windows bottom border and a poinsettia die cut in the centre.

11. Die cut a piece of patterned cardstock k of 7.5x7 cm. Affix it o the inside bottom as shown,

11. Stamp one of the sentiments from the  Festive Phrases clear stamp set over Neenah Card. Die cut the border top and bottom with a decorative Christmas border die. Cut the sides straight.  Attach to the inside bottom. Add foliage and one poinsettia to each side of the sentiment.

Outside :

1. Emboss the piece of white Centura Card with the  Gemini Dimensionals 5 x 7 Embossing Folder - Holly Vine Swirls.  Dab slightly a Mowed Lawn Distress Ink to the embossed surface. Wrap a red ribbon at the bottom. Use few die cuts of foliage and poinsettia to create an embellishment. Place over the ribbon as shown.

2-. Die cut the word Sparkle in black out of black cardstock.  Affix the sentiment at the right side over the ribbon. To finish add one silver snowflake on the top right.

Thanks for stopping by🎄Have a wonderful New Year 2019!🎅

.

Believe 🎅 Tutorial

Hi crafty friends! 🎅 Today's project is another awesome dimensional card.
Hope you like it!

You will need:

15X15 cm Blank x 2

Gemini Create-a-Card Christmas Dimensionals - Sleigh Concept Die

Gemini Create-a-Card Christmas Dimensionals - Sleigh Accessories Pack Dies

Gemini Dimensionals Clear Stamp - Sleigh Accessories

Gemini Dimensionals Clear Stamp - Festive Phrases

Gemini Dimensionals Elements Metal Die - Sparkling Snowflakes 2

Crafter’s Companion Dimensionals 12 x 12 Printed Paper Pad - Decorative Christmas

Crafter’s Companion Dimensionals 12 x 12 Matt Cardstock - Decorative Christmas

Centura Perl Snow White cardstock A3

Gemini - 5 x 7-inch Embossing Folder - Sparkling Snow

White Gesso Pebeo

Clear gems

Blue ribbon 15 cm wide

Spectrum Noir Colour Blend Pencils

Collal Tacky Glue

Craft Essentials

Step by Step

1-  Create 2  blanks of 15x15 cm for the base card with the Centura Pearl A3 Cardstock. Score and fold one by the middle. Keep the other one straight and draw a line with a pencil in the half. Do not score!

2-  Position the Reindeer concept die in the straight card. Make sure the notches in the die are aligned with the pencil line. Secure the die in position with a low tack adhesive, and cut and manipulate the pop-up. Score across the card but not over any of the concept parts, gently fold out the Reindeer. 

3.-Cut a piece of 15 x 15cm Neenah card.  Use Peacock Feathers Distress Ink and a piece of the curvy line die cut with a dabber to create some hills.

4.- Position the piece in the inside top of the card and place your concept die over the base card in the same place where you have the first die cut.  Secure the die with a low tack adhesive.   Remove the base card from underneath and run it through the die cutting machine. Snip and discard away the partial die cut and you will get the perfect outline to do the layering.

5.- Line the base card with the pop out over the plain base card so the back of the pop out can be seen. Use a piece of paper pad with the same design of the inside of the card to stick in the base card just underneath the white space where the pop up is. Make the same procedure for the base of the card with your patterned card.

6.- Glue the two blanks together. Make sure don't glue around or in your pop up.

7.Die cut the little the trees to be positioned over the hills. Add some colour with the spectrum Noir Colour Blend pencils. Affix to the card.

8.- Die cut the Reindeer from the pop out die and the additional one out of brown coloured cardstock. Use the Reindeer stamps with the Stazone ink over the die cuts to give it more detail. Coloured with dark brown SN blend pencil.  Affix the first Reindeer over the pop out and the second close to it, as shown.

9. Affix a piece of blue ribbon over the half of the inside bottom of the card.

10. Stamp one of the sentiments from the  Festive Phrases clear stamp set. Die cut it with the circle die and layer over a scalloped glitter foam circle. Add few blue gems around.  Affix the sentiment to the inside bottom centre with foam pads.

Outside :

1. Emboss the piece of white Centura Card with the  Sparkling Snow  Embossing Folder. Add a light shadow around by applying a light layer of  Peacock Feathers distress ink.

2-. Stamp one of the sentiments from the  Festive Phrases clear stamp set. Die cut it with the circle die and layer over a scalloped patterned paper and white Centura Card.  Affix the sentiment to the centre with foam pads. To finish add few snowflakes with clear gems around the sentiment.

Thanks for stopping by🎄 Christmas blessings to everyone 

Let it Snow 🎄🎅 Tutorial

Hi friends! Merry Christmas 🎄🎅 Thank you so much for taking your time away from family and friends to join me on the blog. Here's a special dimensional card I am sure you'll love.

You will need:

Gemini Create-a-Card Christmas Dimensionals - Sleigh Concept Die

Gemini Create-a-Card Christmas Dimensionals - Sleigh Accessories Pack Dies

Gemini Dimensionals Clear Stamp - Sleigh Accessories

Gemini Dimensionals Clear Stamp - Festive Phrases

Gemini Dimensionals Elements Metal Die - Sparkling Snowflakes 2

Crafter’s Companion Dimensionals 12 x 12 Printed Paper Pad - Decorative Christmas

Crafter’s Companion Dimensionals 12 x 12 Matt Cardstock - Decorative Christmas

Gemini Dimensionals 5 x 7 Embossing Folder - Snowfall Drift

Die'sire  essentials circle and scallop die

Centura Perl Snow White A3

Nennah Card

Peacock Feathers Distress Ink

Stazone Jet Black Inkpad

Dabber, Gems

Collal Tacky Glue,  Spray and Stay Permanent Glue by Crafter's Companion.

Craft Essentials

Step by Step

Inside of the card:

1-  Create 2  blanks of 18 X 14.5 cm for the base card with the Centura Pearl A3 Cardstock. Score and fold one by the middle. Keep the other one straight and draw a line with a pencil in the half. Do not score!

2-  Position the Sleigh concept die in the straight card. Make sure the notches in the die are aligned with the pencil line. Secure the die in position with a low tack adhesive and cut and manipulate the pop-up. Score across the card but not over any of the concept parts, gently fold out the sleigh.

3.-Cut a Neenah card piece of 9 x 14.5 cm. Emboss the piece with the  Snowfall Drift Embossing Folder. Use the Peacock Feathers Distress Ink with a dabber to blend a border around the card.

Position the piece in the inside top of the card and place your concept die over the base card in the same place where you have the first die cut.  Secure the die with a low tack adhesive die cut (only this piece of paper).  Remove the base card from underneath and run it through the die cutting machine. Snip and discard away the partial die cut and you will get the perfect outline to do the layering.  Die cut the curvy line horizontally in the middle of the piece. Stick the piece in the inside top of the card as shown.

4.- Line the base card with the pop out over the plain base card so the back of the pop out can be seen. Use a piece of  paper pad with the same design of the inside of the card to stick in the base card just underneath the white space where the pop up is. Make the same procedure for the base of the card with your patterned card.

5.- Glue the two blanks together. Make sure don't glue around or in your pop up.

6.Die cut the little houses and the trees to be positioned over the curvy line. Add some colour with the spectrum Noir Colour Blend pencils. Affix to the card.

7.- Die cut the sleigh out of coloured cardstock. Use the sleigh stamp with the Stazone ink over the die cut to give it more detail. Coloured with a white or golden gel pen. Die cut the presents the ribbons and the bow. Form presents and stick then in the sleigh as shown.

8. Use the  Sparkling Snowflakes die to create two borders out of White Centura Pearl. Place them in the inside bottom as shown.

9. Stamp one of the sentiments from the  Festive Phrases clear stamp set. Die cut it with the circle die and layer over a patterned paper.  Affix the sentiment to the inside bottom centre with foam pads.

Outside :

1- Cut a piece of patterned paper slightly t  smaller than the top of the card. Layer the piece on the top.

2-Use the  Sparkling Snowflakes die to create two borders out of White Centura Pearl. Place them in the top as shown.

3. Die cut the sentiment 3 times, glue them on top of each other to give it dimension. Place to the top of the card in the right button. Die cut a big snowflake and affix to the card as shown. Add a clear gem in the centre to finish.

Thanks for stopping by!   🎄Christmas blessings for everyone xx

Bow card - Template 💖 Tutorial

Hello Crafty Friends!

Hope you are well and happy. 💓 Today's project is a stunning 3D bow card.
( I add the template at the bottom of the post for you to have a go ).

To create this original card you will need:
Centura Pearl Snow White
Sheena Stamping cardstock

Gemini Clear Stamp - Words of Endearment
Roaring 20's Paper pad by Crafter's Companion
Stazone Jet Black Ink pad

Die'sire Classiques Metal Die - Parisian Mirror
Distress ink abandoned Coral
Dabbers
Collall Glue
Iridescent gems
Craft Essentials.

Step by Step 

1.- Die cut 4 small ovals,  4 large ovals and the ribbon strip out of a floral sheet from the Roaring 20's paper pad. Add a light shadow around the borders by using the distress ink.

2.- Bend carefully each oval. You can use a thick pen or another cylindrical object to shape the middle area of your bow. You aim for a nice rounded curve, not a sharp fold. Glue the endings together to form a loop.

3.- Stamp the sentiment onto a Shenna cardstock. Die cut with the small die from the Parisian mirror sie set. Die cut the Parisian mirror 3 times more. Glue them together. Add the sentiment on the top. This will create a sturdy centre for the bow.

3.- Add the loops in the back of the sentiment. Starting with the small ones and attach the large ones behind them as shown. Use a strong adhesive! 

4.- Cut the Ribbon strip in two. Add each piece to behind the side of the bow, as shown.

5.- With the bow done, just create a blank to affix the bow in the front. 

6.- To finish add some gems, around the sentiment and in the corners of the blank.

Tips: Substitute the centre for an oval or circle shape with images or sentiments.  to have different samples of bow cards.

Thanks for stopping by 💝   Happy Crafting!